Posted by jpaulcscr 31 weeks ago ( 04-Oct-2007 20:14:42 )

I been trying to unlock my iphone all night and i get the ibrick to recognize my iphone, but when i try to upload the file lockdownd in /usr/libexec/ the application always crash in windows vista and also in windows xp, so when i restart the phone again it get frozen and i have to install the firmware 1.0.2 again, try it already like for times on both operating systems.

Please Help

Paul

Posted by turbotimer 31 weeks ago ( 04-Oct-2007 20:46:57 )

Need help from downunder. I bought the iphone overseas. Now im back in OZ and my lil bro "accidentally" updated the 1.1.1 version of firmware on my bloody iphone. what do i do? The phone is completely locked down, it was working previously. Brickr is not recognising my iphone. Now its stuffed, can only make emergency calls.

Someone please help this aussie in distress!

Posted by nazar 31 weeks ago ( 04-Oct-2007 21:54:46 )

To: jpaulcscr

Hi, where do you live? I just hacked my Iphone, Im at Toronto, Canada, can do it for you for free if your in the area...

Posted by turbotimer 31 weeks ago ( 04-Oct-2007 22:22:19 )

man im in australia. not canada. thanks for trying anyway.
Need help from downunder. I bought the iphone overseas. Now im back in OZ and my lil bro "accidentally" updated the 1.1.1 version of firmware on my bloody iphone. what do i do? The phone is completely locked down, it was working previously. Brickr is not recognising my iphone. Now its stuffed, can only make emergency calls.

Someone please help this aussie in distress!

Posted by turbotimer 31 weeks ago ( 04-Oct-2007 22:22:21 )

man im in australia. not canada. thanks for trying anyway.
Need help from downunder. I bought the iphone overseas. Now im back in OZ and my lil bro "accidentally" updated the 1.1.1 version of firmware on my bloody iphone. what do i do? The phone is completely locked down, it was working previously. Brickr is not recognising my iphone. Now its stuffed, can only make emergency calls.

Someone please help this aussie in distress!

Posted by nazar 31 weeks ago ( 04-Oct-2007 22:49:25 )

Ok ausie, the reply wasnt to you if you read more carefully... Now my advice to you is look at the posts above, there are links to videos and tutorials by me, on how to downgrade to 1.02...

Posted by freddynu 31 weeks ago ( 04-Oct-2007 23:42:52 )

gonemad If you want email me so that way I can contact you and I explain it step by step. Twucrzy4u1@aol.com

I have a mda also but you would need more then that.

This comment was edited at 2007-10-04 23:43:48

Posted by gonemad 31 weeks ago ( 05-Oct-2007 00:22:30 )

Are the at&t sim cards good for anything?

Posted by turbotimer 31 weeks ago ( 05-Oct-2007 00:30:14 )

Thanks nazar.. im looking into it now.. top stuff!

Posted by turbotimer 31 weeks ago ( 05-Oct-2007 00:39:19 )

This may sound like a silly question but what is AppTap and where do i find it?

Posted by freddynu 31 weeks ago ( 05-Oct-2007 01:17:22 )

Im curious I dont think that unlocking the 1.1.1 has anything to do with its software.
Why cant we downgrade the firmware in the fieldtest menu of the iphone?
Why is firmware spelled firware?
I think if we find a hack to down grade the firware from 4.01.13_G to 3.14.08_G that we can unlock 1.1.1 phones

Posted by freddynu 31 weeks ago ( 05-Oct-2007 01:19:02 )

here has to be a way to do it there is a trick to all this

Posted by turbotimer 31 weeks ago ( 05-Oct-2007 04:08:45 )

need help again. please view the page. any help in downgrading 1.1.1 to 1.0.2?? bought the fone in the u.s. i dont have a at&t sim. using australian sim. now in australia. i have tried the restore process but it fails to work. please help!

My screen reads.

"Activate IPhone
connect to itunes

insert an unlocked sim to activate iphone"

at the top of the fone. the only option i have is to make emergency calls!

Posted by vlad 31 weeks ago ( 05-Oct-2007 07:46:32 )

iPhone 1.1.1 Finally cracked.. maybe.. details coming..

http://digg.com/apple/iPhone_1_1_1_Finally_cracked
http://www.tuaw.com/2007/10/05/liveblogging-the-big-iphone-1-1-1-hack/

Posted by bigantmo 31 weeks ago ( 05-Oct-2007 09:26:05 )

nazar
please help me. i've tried about 20 times to use install ibrickr on my phone, but when i get to the part where it says "check again" after the restore, i click it and nothing happens. i've tried so many times on vista and xp, but it never works. please help. thank you.

Posted by ballygirl 31 weeks ago ( 05-Oct-2007 09:35:35 )

someone, please help :) i downloaded the ibrickr, and so with it, some voice program. now, everytime my i slide my iphone off the lockmode, some woman's voice says: critical system imminent, system shut-down now... blah, blah... i called apple, and they said i must have downloaded some 3rd system program. i deleted everything, including some program that allowed me to get more sounds. i really thought that was it. still think it is, but the voice is still there every time i slide the phone to go into the main menu. help!!! it is so annoyinng and i just got this phone! please please anyone reply to ballygirl333@aol.com. WHAT DO I DOOOOO!!!!

Posted by ballygirl 31 weeks ago ( 05-Oct-2007 10:40:37 )

I LIKE YOUR PROGRAM, SO MANY COOL THINGS THERE, STILL GOT IT HERE, BUT HOW DO I GET RID OF THAT VOICE? THANK YOU PLEASE, NATE, REPLY :) THANK YOU SO MUCH

Posted by hkscivicsi 31 weeks ago ( 05-Oct-2007 10:55:57 )

wow is it true that there is a crack for fw 1.1.1? anyone know more info on this

Posted by toonek 31 weeks ago ( 05-Oct-2007 11:56:42 )

Hello.
I`m from Poland and have big problem with jailbreaking. My Iphon i not activated, but i made kind of activation with PhoneActSrv, so Ipod functions are working, but offten pop up mesage that i need compleat activation.

I tried to use iBrickr but it canot connect, i even try this trick on not activated phones but any doesnt work.
Could anybody give me some sugestions?
I tried Itunes 7.3.054 and the newest.

Please.

Posted by gonemad 31 weeks ago ( 05-Oct-2007 13:03:32 )

bigantmo and toonek

Read all this before you start.

i found a similar problem on my lap top so i went to hacktheiphone.com, click unlock the iphone, download the itunes.dll and place that in your phonedmg file and also in your ibrickr file. next get a copy of the 102 firmware and place that in: c: documents and setting/"your user name"/applicationdata/applecomputer/itunes/iphonesoftwareupdates.

if you cant find the application data file click on tools and folder options and under view tab make sure you can see "hidden files and folders" and that the box us unchecked for the "hide extensions for know file types"

also make sure that the 102 firmware that you place in the iphone software updates folder is in .ipsw format(if it is in .zip just change the zip to ipsw)

after all that is set up run itunes and plug in your phone, when the activation screen comes up press the sleep and home button until the yellow triangle comes up, itunes will say your phone is in restore mode,click ok, the it gives you the option to restore but DO NOT, just close itunes and press the sleep button until your phone powers off. now turn your phone on it will take awhile to come to the activation screen but when it does start ibrickr. if it says it cant find the phone unplug it and plug it again. I used itunes 7.4.1.2

Posted by bigantmo 31 weeks ago ( 05-Oct-2007 14:45:39 )

pardon me, but what is your phonedmg file

Posted by gonemad 31 weeks ago ( 05-Oct-2007 14:57:03 )

you need to set it up in order to run the jailbreak and ibricker stuff go to hacktheiphone.com and click on unlock the iphone and it will give you instructions on how to set it up.

Posted by gonemad 31 weeks ago ( 05-Oct-2007 15:03:29 )

anyone having problems syncing music into their phone? mine throws me out after about 2 min.

Posted by hollywoodd 31 weeks ago ( 05-Oct-2007 15:11:48 )

Nazar,

What version did your phone ship with 1.1.1?

Posted by mustang 31 weeks ago ( 05-Oct-2007 17:10:32 )

Hey I cant get past the check again part. And I dont know what to do and when I click send a error report I look at the report and it says no firmware I have no clue what to do help me

Posted by vlad 31 weeks ago ( 05-Oct-2007 17:22:14 )

Yes yes. more things to share with everyone.

Russian Hacker has Reanimated Apple iPhone after iPocalypse 1.1.1 Update: Step-by-Step Manual

http://iphonews.ifastnet.com/index.php/2007/10/05/russian-hacker-has-reanimated-apple-iphone-after-ipocalypse-111-update-step-by-step-manual/

This is an exclusive instructions how to reanimate your unlocked Apple iPhone after crusial 1.1.1 Update. Big thanks to russia hacker ax5 who created and tested this hack, all works perfectly.

1. What is “The Multi-SIM (Mega-SIM or Silver-SIM) Method”?

We take the AT&T SIM-card from your iPhone;
We take your own SIM-card of your local mobile communication carrier;
From two SIM-cards we create one SIM-card and insert it in your lovely iPhone;
Thus your AT&T and your original SIM-cards remain untouched and safe (in 98% of cases), we won’t need these any more.

2. Ok, how it works:
You must have a new Apple iPhone with an 1.0.2 firmware or lower;
Or you must have a new Apple iPhone with an 1.1.1 firmware;
Or your Apple iPhone must be already unlocked but only if you used, Multi-SIM (or similar Mega-SIM, etc.) and which have 1.0.2 firmware (or lower) and you have casually updated it up to 1.1.1 version.

If you have made software unlocking (AnySIM and similar) and in your phone was ANY other (not Multi-SIM card) and you casually or intentionally have installed an 1.1.1 firmware or you casually tried to start any another software unlocking after a upgrade up to 1.1.1 version - THIS HACK WONT HELP YOU!

For others - I continue:

3. First you have to make your iPhone’s downgrading, it is written HERE!

4. Now you have a SIM-card from chapter 1, you have to insert it into your iPhone and make a jailbreak and activation of your iPhone. In MAC it is done by the software called iNdependence_v1.2.1a (in Windows - I do not know, but in my opinion iBrick will help you). With the same utility you have to open SSH access which will allow to modify your iPhone. Write in a username and password for this access (in IAN the standard - root and pick). Then install one more access - mobile and pick.

5. After that (your iPhone should already work) you write in EDGE parameters for the carrier and adjust WiFi if during this moment you are in a zone of Wi-Fi access.

6. After that you have to install AppInstaller and through it install SSH.

7. Then you have to reinstall all you favorite applications for iPhone.

8. Now You can use your lovely Apple iPhone and haughtily look at those who have used software unlocking (or AnySIM unlocking) because you are the first which unlocked iPhone works after iPocalypse 1.1.1 Update.

Posted by mclb 31 weeks ago ( 05-Oct-2007 19:31:00 )

I bought a new iphone, and i restored it and i have the 1.1.1 on it!!! and not able to downgrade it, does anyone know how to fix that? thanks a lot

Posted by mclb 31 weeks ago ( 05-Oct-2007 19:31:02 )

I bought a new iphone, and i restored it and i have the 1.1.1 on it!!! and not able to downgrade it, does anyone know how to fix that? thanks a lot

Posted by nazar 31 weeks ago ( 05-Oct-2007 20:30:38 )

To: hollywoodd

I don't know what version it was, as theres no way of checking, at least as far as I am concerned, luckily it wasn't 1.1.1
so I didn't have to hustle it...

Posted by toonek 31 weeks ago ( 06-Oct-2007 01:10:14 )

gonemad :

:/ still nothing ... im trying now runing mac os on my pc .. hehe :]
Iost all hope...

Posted by johnpiks 31 weeks ago ( 06-Oct-2007 05:34:39 )

Hello Everyone..

I think the link for the iBrickr_v8.0's screwed man, its says file is damaged or corrupted if you try to unzip it..
Can anyone send me a working iBrickr v8.0 please..I have this iPhone but i cant use it because of this,hope someone would help..
Thanks

Posted by johnpiks 31 weeks ago ( 06-Oct-2007 05:41:06 )

BTW here my email for the iBrickr v8.0 request

lol_totong@yahoo.com

thanks

Posted by toonek 31 weeks ago ( 06-Oct-2007 08:46:23 )

Hi anyone ;) I found solution fine for me so i share.

When I had problem with first connecion to iBrickr ( it couldn`t jailbreak ) i used AppTapp. No i`m usying iBrickr with no problem. The only bad thing is that iBrickr doesn`t see install apps to uninstall

Posted by bocdk 31 weeks ago ( 06-Oct-2007 08:51:53 )

my iphone is using like a ipod touch! internet those works well, only no idea with youtube this funsion, its always said (cannot connet to youtube ! can anyone help me ?

Posted by pedroarquemena 31 weeks ago ( 06-Oct-2007 12:47:15 )

hi i have the 1.0.2 firmware in my iphone y tried thousands of times to use the ibrickr and it doesnt work it allways says "check again" i have done aswell the update and unplug and all that stuff what can i do ¿?please help

Posted by ppparker 31 weeks ago ( 07-Oct-2007 01:43:19 )

I was installing 1.1.1 from 1.0.2 when I disconnected it from the cradle before it was completed. Now all I get is the "Please Connect to iTunes" yellow triangle. I talked with Apple and they said all I can do is plug the iPhone to the USB and Restore in iTunes. This will wipe the phone clean and put the 1.1.1 firmware on it. I have hindreds of photos and contacts that are not backed up on my computer. I would like to get them off before I do the Restore. Does anyone know if I do a Restore to the 1.0.2 firmware if it will return the iPhone to the state it was in before it had problems? Or if it will simply wipe the memory and do a normal Restore? Any other suggestions to pull the info off?

Posted by thevi 31 weeks ago ( 07-Oct-2007 10:17:17 )

Anybody, do any of you guys know why I have to restore every time I want to sinc my Iphone, On mine if I dont restore neither itunes or brckr will find it in my computer...
Am I doing something wrong?????

Posted by pedroarquemena 31 weeks ago ( 07-Oct-2007 11:51:46 )

hi nate!!
Can you help me i'm so pissed and i dont know what can i do.
I bought the iphone last week and i've tried to use the ibrikr(0,8)with an iphone(it's not activated) with the 1.0.1 firmware and it always says the same "CHECK AGAIN"!! i did thousands of times unplug the iphone, the same way you do it in the video and try to fire up the i tunes (7.3.2) and it didn't work . Then i uptdate my iphone to the 1.0.2 firmware and it didn't work either please i need help i dont know what can i do.i need to use IBRICKR to unlock please HELLLPPPP!!! i would put money in the acount if you want but i need help please
THANKS FOR ALL
congratulations with the IBRIKR Mr. NATE

Posted by gonemad 31 weeks ago ( 07-Oct-2007 13:04:14 )

For those of you that ibrickr says check again, do you have the "phonedmg" file set up??? If not go to hacktheiphone.com and it will show you how to set it up(right before step 1). Also place a copy of 102 firmware in the "iphone update software" folder(for location of this file see my earlier posts". use itunes 7.4.1.2, run itunes, connect the phone, put it in restore mode,close itunes, turn your phone off by pressing and holding the sleep button, once off turn it back on(this will take a while for it to restart) now run ibrickr, it should work now.

This comment was edited at 2007-10-07 13:08:04

Posted by tayloruk 31 weeks ago ( 07-Oct-2007 14:10:24 )

Hi, i'm desperate for help!!!
I've been trying to unlocked my iphone for 3 days now, and i'm at breaking point!
i've having the same problem no matter what i do. first off i was stuck on the Ibrickr program (couldn't get past the first stage (keep sayin check again). So i read somewhere that i need to install the 1.0.2 firmware, i've downgraded to the older version of itunes, and tried to Restore my iphone to the 1.0.2 but it fails at the end. i open ibrickr, and it doesn't even recognise that my iphones there. (my iphones got no firmware installed) i've no idea where to go, or what to do!?!
Please Help!!
I'm BEGGING!!

Posted by graverski 31 weeks ago ( 07-Oct-2007 16:02:05 )

Hi, i need a big help, also. I was jailbraking my iPhone with iBrickr and the phone stucked at Please Connect to iTunes. It's been 4 hours now and iTunes and iBrickr does not recognize it anymore. I cant restart and can't turn off the iPhone. I restarted my PC reinstalled iTunes, changed USB ports, no result. Tried another computer, the same - iTunes does not recognize the iPhone and the iPhone stays at "Please connect to iTunes". I will appreciate your help. Thank you.

Posted by gonemad 31 weeks ago ( 07-Oct-2007 16:46:46 )

do you have a yellow triangle or itunes symbol and cable?

Posted by graverski 31 weeks ago ( 07-Oct-2007 16:52:19 )

Yellow triangle.

Posted by imapfsr 31 weeks ago ( 07-Oct-2007 17:05:20 )

Hi All,
Glad I found this. I am receiving my iphone on Tuesday and want to unlock it. In reading the tutorial I have two questions. 1. Is there anyway of finding out which firmware version is on your iphone? 2 When downloading the 1.02 firmware the tutorial says to save it to C:\Documents and Settings\(your username)\Application Data\Apple Computer\iTunes\iPhone Software Updates and I cannot find that file onmy HP TX1220CA running Vista(in cas that info matters). Is that because I havent hooked up an iphone yet so that file has not been created. If not any idea how to create that directory or is there another alternative as this is a little beyond my tech level. Thanks in advance for any help you can offer.
Todd

This comment was edited at 2007-10-07 17:06:21

Posted by gonemad 31 weeks ago ( 07-Oct-2007 17:18:22 )

graverski: when you connect ot itunes does it tell you restore? if so push the shift key and restore button at the same time, this will give you the option of what software to restore, select the 102, whatever you do dont select the 111. if you dont have 102 download it and place it in the this location C:\Documents and Settings\(your username)\Application Data\Apple Computer\iTunes\iPhone Software Updates. then try the shift and restore again.

imapfsr:go to hacktheiphone.com and under the unlock tab follow the tutorial on how to set up the phonedmg folder, you cant see the file because of the settings in the folder options. go through the tutorial.

let me know.

Posted by graverski 31 weeks ago ( 07-Oct-2007 17:24:16 )

No, iTunes does not recognize the iPhone. Nothing happens when i plug it in. I think the iPhone is stucked there because i can't restart it nor turn it off. After reading a couple of hours i didn't find a solution about that.

Posted by gonemad 31 weeks ago ( 07-Oct-2007 17:39:39 )

did you try the home and sleep keys then after 10 seconds releasing the sleep key but keeping the home key pressed?

Posted by graverski 31 weeks ago ( 07-Oct-2007 17:49:10 )

Yes, just tried it. Not working again. I also tried holding both of the keys for 2 minutes and it doesn't power off. Tried holding them separately no chance. It just stays at that screen and nothing happens :(

Posted by imapfsr 31 weeks ago ( 07-Oct-2007 17:51:01 )

gonemad
thanks for the quick reply. I did what you said and all worked fine. Just one question. When I downloaded the 1.02 and moved it to the phonedmg folder and then opened my folder there was only one app in there. The 1.02 restore app with a little lego looking icon but in the tutorial there were five or six files in the folder. Did I do something wrong. Thanks again for your help.

Posted by gonemad 31 weeks ago ( 07-Oct-2007 19:01:45 )

imapfsr it is the way the file is set up, change the extension from .ipsw to .zip then unzip the file then it should look the other way.

Graverski sorry i dont have any other ideas???

Posted by imapfsr 31 weeks ago ( 07-Oct-2007 19:32:22 )

gonemad
seemed to work, thanks again.

Posted by gonemad 31 weeks ago ( 07-Oct-2007 19:43:40 )

imapfsr when you place the file in the "iphone software updates" folder leave it in ipsw format. Also your phone may come with the 1.1.1 software if it does when you downgrade you will not be able to make calls but everything else will work.

Posted by graverski 31 weeks ago ( 07-Oct-2007 20:00:44 )

Goneman, battery went off and iPhone stopped. Now i will give it an hour recharging and try to reflash. Will post results

Posted by rush 31 weeks ago ( 07-Oct-2007 20:51:51 )

Hey guys, I passed through all step by step, by once I run anySIM, I get the following message:
"The firmware on this iPhone is already patched. anySIM will now quit. Please turn off your phone and turn it on again after anySIM quits."
My iPhone firmware is 1.0.2 (1C28) and I can run ibrickr normally with the iPhone. Everything is working, but I cant use another SIM card.
Can someone help me to identify what procedure I've done wrong and how to unlock the SIM card.
Tks,
Rush

Posted by gonemad 31 weeks ago ( 07-Oct-2007 20:55:05 )

rush did you downgrade from 1.1.1??? if so you wont be able to make calls.

Posted by rush 31 weeks ago ( 07-Oct-2007 21:52:13 )

Yes I did. :( and my firmware version is 1.0.2 (04.01.13G)
So, it seems that I have to wait some new version of anySIM that can unlock it, right?

Posted by gonemad 31 weeks ago ( 08-Oct-2007 00:45:34 )

yup srry.

Posted by jyang 31 weeks ago ( 08-Oct-2007 04:19:10 )

OK Folks, I need some help here. I've read this blog so many times that I'm seeing doubles. I've been trying to unlock my iphone for the past couple of days but I can't seem to get it working. The iBrickr won't recognize the restore mode once it's gone through the initial part of jailbreaking. Please help.

I'm using iTUne 7.4.1.2. My unit reported 3.14xxx for the firmware so I assume it'd be 1.0.2. I've since then successfully restored to 1.0.2 firmware image provided above multiple times.

Is there a step by step instruction for jail breaking using commandline tools?

Thank you for any and all responses. =)

Posted by jyang 31 weeks ago ( 08-Oct-2007 07:45:53 )

Thank you gonemad for trying to help. In the end I solved it myself. As it turns out, once you've installed the latest version of iTunes on your machine, its next to impossible to get rid of some remnants of it. I had updated to the latest version prior to purchasing iPhone because I own a Shuffle. I read the posts carefuly and before connecting my iPhone, I had downgraded to iTunes 7.3.2.6. It took a lot of work to get there, but eventualy, I thought I had gotten everything.

It turns out I didn't get everything. That particular computer will no longer acknowledge iPhone in recovery mode outside of iTunes. The iTunes will recognize it fine and allowed me to refresh the Firmware to 1.0.2, but no other utility iphoneconnect, ibrickr, apptapinstaller, etc, will not recognize the iPhone in Recovery mode.

Just my two cents. If someone knows exactly what to look for, like a registry entry or a driver version, etc let me know.

Otherwise, be aware that if you load the latest iTunes on your machine, it's very difficult to undo. At least, I haven't figured out a way yet.

This comment was edited at 2007-10-10 07:40:26

Posted by gonemad 31 weeks ago ( 08-Oct-2007 09:19:00 )

jyang did you connect it to itunes first then put it in restore mode?

Posted by gonemad 31 weeks ago ( 08-Oct-2007 09:26:45 )

how about the "phonedmg" folder?

Posted by tayloruk 31 weeks ago ( 08-Oct-2007 10:08:23 )

If you've updated to 1.1.1 firmware can you reset and install 1.0.2 firmware and still unlock the iphone?

Posted by gonemad 31 weeks ago ( 08-Oct-2007 10:19:44 )

you can install and activate but not unlock in otherwords all the features work but calls. for a tutorial google "downgrade iphone youtube" there is a step by step video with some cheesey music.

Posted by tayloruk 31 weeks ago ( 08-Oct-2007 10:42:23 )

"gonemad" - i've installed the Anysim v1.02 and it says i should see the springboard with the anysim application on there but i can't see the Springboard at all. it's still on the "active iphone".
What've i done wrong>

Posted by vlad 31 weeks ago ( 08-Oct-2007 11:39:06 )

Preliminary iPhone 1.1.1 Jailbreak

http://www.tuaw.com/2007/10/08/announcing-a-preliminary-iphone-1-1-1-jailbreak/

he iPhone/iTouch Dev guys have been hard at work for weeks and have finally managed to jailbreak 1.1.1. Right now, they're nowhere near releasing a general-use tool but the first steps have been made. Congratulations to dinopio, asap18, netkas, Martyn, mjc, Niacin, BloomFilter, pytey, tE_gU, pumpkin, roxfan, sam, SmileyDude, NerveGas, Nate True, Arminius, DirectriX, ixtli, kroo, zibri, xorl, and the rest of the team.

So what does this jailbreak mean?

* Third Party apps run. Kind of. We probably have to recompile many of them for the new frameworks because many of them crash.
* Springboard no longer recognizes DisplayOrder.plist. And the list of "whitelisted" apps (that is, the official Applications including Safari, Photos, Calendar, etc) seems to be hard-coded into Springboard.app
* The iPhone has been activated via third-party workarounds.
* The 1.1.1 binaries barely work with 1.0.2 -- at least not well enough to run the music store without major hacking.
* The Mobile Terminal App works on 1.1.1.
* The entire bsd suite still works -- as do standard command-line utilities compiled for ARM.
* 1.1.1 references both com.apple.mobile.radio and com.apple.mobile.nike.
* The jailbreak method is nowhere near ready for prime time. So please be patient.

Posted by gonemad 31 weeks ago ( 08-Oct-2007 11:48:02 )

if you updated to 1.1.1 you will need to downgrade first and then reunlock but you will not be able to make phone calls. for the tutorial go here: http://www.youtube.com/watch?v=FE85O8zdTTs&mode=related&search=

Posted by tayloruk 31 weeks ago ( 08-Oct-2007 11:51:59 )

i've updated one but not the other. i've got to the point where you install anysim application but it say's i should see the springboard but i dont. it still says i need to activate iphone, any idea where i've gone wrong.

Posted by gonemad 31 weeks ago ( 08-Oct-2007 12:04:17 )

Have you gone to Hacktheiphone.com? it gives you the steps and files you will need to activate the phone. I think you need to run the pacay application. Start from the beginning and make sure you have set up the phonedmg folder and have a copy of the 1.0.2 firmware in the "iphone software updates" folder.

Posted by vlad 31 weeks ago ( 08-Oct-2007 17:50:23 )

If you people mind me posting things, just let me know.. till then.. Enjoy..

Third Party Apps ported to iPhone 1.1.1

http://www.tuaw.com/2007/10/08/third-party-apps-ported-to-iphone-1-1-1/

his morning, we were having a lot of trouble getting third-party iPhone apps to show up properly and run on the home screen. Despite the fact that Apple has added extra protections to SpringBoard and created a list of approved identifiers, iPhone hacker asap18 has managed to port several applications to the iPhone and gotten them to appear properly on the home screen. For now, only 15 icons can be added this way--the last spot appears to be reserved for iTunes. The apps have been tested and are working fine.

He has also tracked down an option for International capabilities in SpringBoard, which may lead to foreign language Application support. This will be needed in countries like Germany and France, where the iPhone will shortly debut.

This is a developing story, and we'll be keeping an eye on it but remember this success is only in regards to running apps on the 1.1.1 firmware. Unlocked iPhones still run the danger of being bricked when upgraded to the 1.1.1 firmware, so if you have an unlocked iPhone do not upgrade to the latest firmware.

Posted by nazar 31 weeks ago ( 09-Oct-2007 01:34:33 )

Whats up everyone, its been a while since I last visited here, hopefully Nate checks the posts here, as I have a question to him, so far as I noticed Ibrickr isnt working with Vista Ultimate 64bit(which I run on my laptop) the question/tip for a future update is to make it work with the 64bit version of vista... thnx

Posted by iphonenoob 31 weeks ago ( 09-Oct-2007 09:10:22 )

Can someone help clarify something for me? I have used iBrickr to add third party apps to my iPhone (running the 1.02 firmware). I use AT&T for my service. I have not installed any software/hardware to modify my sim. I realize that if I were to update to the 1.1.1 firmware, this would break iBrickr and my ability to run third-party apps, but would this cause me problems with making calls or only those people who are can't make calls have a modified sim?

This comment was edited at 2007-10-09 09:15:35

Posted by aussie 31 weeks ago ( 09-Oct-2007 13:28:23 )

Nate! how u doing I need some advice or help!

I bought a new Iphone and is not activated. I have installed itunes 7.3.0.4 and run ibrick but i always stuck
in the same screen after it says please wait your iphone is being modifying .....
my iphone does not show the yellow triangle but the itunes Icon with the CD and the connect cable image.

I try to install firmware 1.02 because I thought this is because my iphone comes with another firmware and all the time I got this error from itunes after trying to install the firmware 1.02 I downloaded too.

the error says:

"the iphone could not be restored. AN unknown error occurred (1)."


Questions:

1) is there a way to know what firmware I have if the phone is not activated?
2) is there a way to install the firmware 1.02 other than using itunes? or how can I do it bypassing that error above.
3) what are the real step to make a not activated iphone work with ibrick?

thanks in advace I hope to hear from u soon!

Posted by phillypino 31 weeks ago ( 09-Oct-2007 13:56:30 )

hey guys. i have a few question. is it safe if i update my iphone to firmware 1.1.1? my iphone is not unlock it just has the installer app and other application except the anySIM. I want to confirm first if its safe to update my phone.

REPLY ASAP tHNKS

Posted by gonemad 31 weeks ago ( 09-Oct-2007 14:17:38 )

Aussie you have 1.1.1 see my eairlier post and view the video on the tutorial, you still wont be able to make calls but you can run 3rd party apps.

phillypino i dont think you can i think you should just wait it shouldn't be to much longer before they hack 1.1.1 completely.

Posted by vlad 31 weeks ago ( 09-Oct-2007 17:03:46 )

phillypino

if you read some of my earlier posts you'll see that 1.1.1 has been hacked and hacked completely. running apps and making calls. the hackers are working on making an install procedure for everyone. then the people that made ibrickr will Im sure have a great new version. and if you still want to upgrade to 1.1.1 DO A RESTORE FIRST and do not try to install anything yet.

Posted by natetrue 31 weeks ago ( 09-Oct-2007 18:10:00 )

Yo guys, iBrickr v0.9 is out and it guides you through downgrading now. No more guesswork with button holding.

Posted by phillypino 31 weeks ago ( 09-Oct-2007 18:13:07 )

cool nate im da first one to download it lol. thnkx for you great work.

Posted by imapfsr 31 weeks ago ( 09-Oct-2007 18:56:46 )

gonemad,
I followed your instructions to create the phonedmg file but I am still unable to get pass the ibrickr step. When I plug in my iphone and run ibrickr it says 1st time must jailbreak. This is where I am stuck because I am unable to findt the C:\Documents and Settings\(your username)\Application Data\Apple Computer\iTunes\iPhone Software Updates file to place the 1.02 file. So I hit check again in Ibrickr and it does nothing. Please help

Posted by rush 31 weeks ago ( 09-Oct-2007 19:08:08 )

So it seems that there is hope to my iphone that is unlocked, but fails on anySim. Im posting this message from my iphone wifi access, just waiting to change my simcard. Great job guys.

Posted by rush 31 weeks ago ( 09-Oct-2007 21:01:51 )

imap
you should change your view settings to show hidden files. Thenyou will find the directory to place the version 1.0.2

Posted by gonemad 31 weeks ago ( 09-Oct-2007 21:17:39 )

imapfsr, go to my computer, double click any file, go to tools tab, select folder options, click view tab. under "hidden file and folders" check "show hidden files and folders", then uncheck "hide extensions for known file types", select ok and close the window. you should now be able to follow the trail of bread crumbs : - )

Posted by gonemad 31 weeks ago ( 09-Oct-2007 21:21:51 )

Do you see the "free my iphone" button when you run ibrickr?

Posted by mjspag 31 weeks ago ( 09-Oct-2007 21:24:31 )

hey nate,
I just used your Ibrickr 0.9 to downgrade back to 1.0.2 and when I try to download PXL files it gives me an error message that iphoneinterface.exe has encountered a problem.. how do I fix this?
thanks

Posted by gonemad 31 weeks ago ( 09-Oct-2007 21:24:46 )

also when you place it in the iphone software updates folder leave it in .ipsw format.

Posted by porkchoppryde 31 weeks ago ( 09-Oct-2007 22:33:00 )

Hello, I just recently got my iphone and am new to this whole modding thing ... I got ibricr but when i click on applications and add the file like NES for example the program just crashes O_O i don't know why this happens please help me. It doesnt matter which PXL file I use they all crash and the program just sits there and does nothing ... it scares me cause i dont want to mess up my Iphone O_O

Posted by gonemad 31 weeks ago ( 09-Oct-2007 22:48:19 )

did you download the 0.9 version? seems to be a problem with the program. give me your email and i will email you a zip of the 0.8, unless you want to wait.

Posted by gonemad 31 weeks ago ( 09-Oct-2007 22:48:39 )

did you download the 0.9 version? seems to be a problem with the program. give me your email and i will email you a zip of the 0.8, unless you want to wait.

Posted by zzzeugen 31 weeks ago ( 10-Oct-2007 02:37:04 )

hi.
thank you for everything, i love you for posting your tutorial.
a question. a had an iphone with the old soft (and unlocked), but, silly me, i upgraded it. after that, by using your tutorial i downgraded it (to vers 1.0.2) and i tried to unlock it (iunlocker method). but it doesn't work, can't see the sim, can't call.
what can i do?

Posted by areku 31 weeks ago ( 10-Oct-2007 03:52:28 )

I second that. I dled 0.9 and when trying to install a PXL app to the iPhone, a Windows error pops up (iphoneinterface.exe error)

Posted by areku 31 weeks ago ( 10-Oct-2007 04:18:44 )

gonemad, i "reinstalled" 0.8 and now it can't see the iphone. 0.9 still sees it fine. any idea of whats going on?

Posted by geekmom 31 weeks ago ( 10-Oct-2007 06:14:23 )

Help, I am having trouble installing anySIM it errors out everytime What am I doing wrong?

Posted by geekmom 31 weeks ago ( 10-Oct-2007 06:16:31 )

Posted by areku 31 weeks ago ( 10-Oct-2007 07:31:45 )

Its not you but v0.9

Get back to 0.8

Posted by lekabel 31 weeks ago ( 10-Oct-2007 07:53:36 )

Man,I tried to downgrade with 0.9 but it stuck my Iphone on a Boot loop and all i can get is that silver apple logo turning on and off,please help me

Posted by areku 31 weeks ago ( 10-Oct-2007 07:57:56 )

Shut down ibrickr, stop the phone holding HOME and POWER buttons for at least 25sec.

Then open itunes 7.3.0.54 and be sure you have the 1.02 firmware somewhere in your hard drive.

Then tell itunes to RESTORE your iphone.

Posted by dozen 31 weeks ago ( 10-Oct-2007 08:00:05 )

Guys, could you help me with my edge settings? I got an unlocked iphone online, installed proxy.pac and preferences.plist via ibrickr version 0.8, and it worked fine about 2 weeks ago. I was only able to use it for 2 days though. Edge doesn't work anymore, even after reinstalling the files , and changing my APN to wap.voicestream.com, and leaving the others blank. I even tried it from ibrickr v0.9 without luck. I'm subscribed to T-Mobile's T-Zones. Any help would be appreciated. Thanks.

This comment was edited at 2007-10-10 10:42:15

Posted by macdo 31 weeks ago ( 10-Oct-2007 08:14:03 )

Hi Nate, congrats your iBrickr ROCKS!!!
Is there any chance to ask you to add a functionality to iBrickr?
There's a way to take a screenshot from iphone's screen through ssh (http://hacktheiphone.com/73/iphone_how_to_screenshot_windows.html) , but we all know the energy problems with ssh, stopping the service even with services app...
If you can reset springboard through ibrickr when you install an app, you can upload or download files through the usb cable, could ibrickr execute a file inside iphone system files and then download automatically the image screenshot as it does with the other downloads?

That will be a nice to have! please tell me what do you think and if my english is not much clear let me know.

Regards,
macdo

Posted by geekmom 31 weeks ago ( 10-Oct-2007 08:17:44 )

How do I get the 0.8 version? Thanks!

Posted by natetrue 31 weeks ago ( 10-Oct-2007 08:42:52 )

You guys, I'm not having any issues with version 0.9 - I think it might have just been a PXL server load issue. Are you still having problems?

Posted by imapfsr 31 weeks ago ( 10-Oct-2007 08:58:21 )

gonemad,
I must report with a huge smile on my face.....great success !!!!!!!!!!!! I am now using my Iphone on Rogers with all the goodies. Thanks so much for your help and to everyone who has to do with this site!!!!! You guys are awesome.
Todd

Posted by geekmom 31 weeks ago ( 10-Oct-2007 09:01:39 )

Shoot I am at work and won't be able to try until after 5 or 6 tonight.

Thanks!
Shannon

Posted by geekmom 31 weeks ago ( 10-Oct-2007 09:04:10 )

I tried like 10 times last nite and about that many this morning, no luck :)

Posted by vdutra 31 weeks ago ( 10-Oct-2007 10:20:11 )

Nate, congratulations for you!

Nate, the version 0.9 iPhone comes back to make calls with anySIM?
you it could give more information to install?

Thanks
Victor

Posted by vdutra 31 weeks ago ( 10-Oct-2007 10:40:10 )

Nate

it is not functioning! (NOW)
I reinstalled version 1.1.1 again,
the red triangle disappeared and appeared iTunes in iPhone again
I copied the archive 1.0.2.ipsw for the folder iBrickr0.9,
I executed iBrickr0.9 it it was part of download 1.0.2 and stopped in the way,
the screen with the triangle was red
it appeared a screen in text in iPhone
I installed pxl, and when it tried to install the applications,
it gave some problems, the WinXP asking for to close the screen of iBrickr0.9,
in the end he was with the screen of the ATT

thanks in advance

Posted by nazar 31 weeks ago ( 10-Oct-2007 12:22:05 )

Any one knows does Ibrickr 0.9 works with Vista 64-bit? (Vista Ultimate 64bit) thnx...

Posted by onsins 31 weeks ago ( 10-Oct-2007 12:34:37 )

Hello everyone,
i kinda need some help with ibrickr version 0.9 it is a bit funny because when i click on applications and try to upload installer onto my iphone an error message from windows appears nd tells me to either send, dont send or debug. it reports an error bout iphoneinterface.exe , wen i go back to ibrickr version 0.8 everything works fine.
please help.

Posted by caac 31 weeks ago ( 10-Oct-2007 12:38:43 )

Hi !

I followed the instructions on hacktheiphone to jailbreak, activate and unlock the iPhone. I used iBricker (v 0.8) and anySIM for this. I was able to successfully jailbreak, and unlock the iPhone. I also installed AppTapp, XLaunch, VNSea, Lockdown, BSD System, Light on it.

But now my "Home" button does not work. It works but I've to keep it pressed for like 60-70 seconds at a stretch. So, for example, if I opened "calculator" application or let's say I go to "iPod" mode and then I pressed "home" button to get back to the home page, it wouldn't go back. If I keep homebutton pressed for very long (like 60 seconds or so) it goes back to the home screen.

Once it starts working, the home button responds fine after that. For few mins though. After few mins, home button stops responding again and then I have to hold it for 60-70 seconds.

I am in Canada, so I can't take it to Apple store. Also, I anyway voided the warranty by doing jailbreak and unlocking. It doesn't look like it is a hardware issue though.

Any one else had the same problem? Any recommended solution?

Thanks.

Posted by geekmom 31 weeks ago ( 10-Oct-2007 13:08:31 )

Ok I am going back and rereading everything and am a bit confused. By BF gave me his 4gig phone (he went for the 8) and he restored it back to factory settings, but it looks that it was upgraded to firmware 1.1.1. If I use I bricker and downgrade it I can't use the phone part of the program? Is this why I can't get iBrickr to upload the anySIM program? Help!!!!!! I can be emailed directly at naturewalkmom at msn.com

Thanks!!!!

Posted by olineyjg 31 weeks ago ( 10-Oct-2007 13:50:25 )

I was wondering the same thing.. If i downgrade even with ibrickr 0.9, will i be able to make calls or not?

Posted by gonemad 31 weeks ago ( 10-Oct-2007 14:07:31 )

no ibrickr just simplifies the steps to downgrade.

Posted by dozen 31 weeks ago ( 10-Oct-2007 14:21:32 )

Could someone help with my EDGE settings, please? Thanks!

Posted by joemacinscotland 31 weeks ago ( 10-Oct-2007 14:47:27 )

Hiya,
bought an iphone in Florida last week with firm 1.1.1 and by following the instructions on here I managed to quickly get activated and jailbroken ( jailbraked? ) anyhoo - I managed to F*** it up and bricked the phone again.
However take heart all of you who have done the same - I simply upgraded back to 1.1.1 then went through the process of downgrading etc.

I still dont have phone capability, as I cant seem to get Anysim to work right, but the other functions all work.
Does ibrickr 0.9 downgrade the modem firmware to allow anysim to work?

Joe

Posted by joemacinscotland 31 weeks ago ( 10-Oct-2007 14:51:16 )

BTW
In Scotland ( Duh!)
Vista
itunes ver7.4
used ibrickr 0.8 to open up

I know its a fuss to fanny about with all the software and apart from all the Apple politics bollocks - its a great gadget and cool as F*** to flash to other gadget freaks. -

Joe

Posted by vladtelecom 30 weeks ago ( 10-Oct-2007 15:27:51 )

I have the same problem as onsins in 9.0. When I try to install any application, at the uploading screen I get a windows error. I have windows xp, and in 8.0 the program dowsn't find my iphone. Any sugestions?

Posted by areku 30 weeks ago ( 10-Oct-2007 15:31:09 )

We just need to wait... (i guess author noticed about the bug already :?)

Posted by dozen 30 weeks ago ( 10-Oct-2007 15:40:09 )

Vladtelecom, try extracting the zipped files onto another folder before using ibrickr. It should work.

Posted by rikicorn 30 weeks ago ( 10-Oct-2007 16:04:52 )

Got the iphoneinterface.exe error message in Vista and XP with 0.9

Posted by porkchoppryde 30 weeks ago ( 10-Oct-2007 16:21:45 )

gonemad is there somewhere I can just download 0.8 I don't see where I can email you to email you my email lol

Posted by gonemad 30 weeks ago ( 10-Oct-2007 16:58:20 )

This comment was edited at 2007-10-10 17:51:31

Posted by juanp 30 weeks ago ( 10-Oct-2007 17:00:23 )

I get stuck on the white screen for a very long time on version 9. Any help?

Posted by erickw 30 weeks ago ( 10-Oct-2007 17:31:39 )

Every time i try to upload or download a file iphoneinterface makes an error and the prosses stop

Posted by juanp 30 weeks ago ( 10-Oct-2007 17:41:58 )

Do I need iTunes 7.3.0.54 installed before running ibrickr 9?

Posted by gonemad 30 weeks ago ( 10-Oct-2007 17:59:11 )

I used itunes 7.4.1.2 worked great. you need to connect to itunes before you run ibrickr.
run itunes
put phone inrestore mode( you must have a yellow triangle on your phone, if not you have to downgrade)
connect to itunes, itunes will tell you the phone is in restore, click ok
close itunes, turn off phone by pressing sleep untill off
turn on phone and run ibrickr make sure you have the phonedmg file set up(if you dont go to hacktheiphone.com for the tutorial, its right under the ATTENTION but above step 1)

Posted by jdubyah 30 weeks ago ( 10-Oct-2007 17:59:25 )

When do you expect the 1.1.1 jailbreak to be up and running?

Posted by juanp 30 weeks ago ( 10-Oct-2007 18:05:10 )

hey gonemad im tryin to downgrade but when the white screen pops up it just stays there forever..any ideas?

Posted by gonemad 30 weeks ago ( 10-Oct-2007 18:09:07 )

sorry i havent tried downgrading using the ibrickr 9, i did it the old fashion way like on tutorial on youtube(the one with the music, "Please dont stop the music")lol srry no ideas % - (

Posted by lottslott 30 weeks ago ( 10-Oct-2007 18:52:09 )

to the gents having iphones not being Reccognized by ibrickr., in windows xp and vista it is do to a resent update from windows, well it makes ibrickr software useless, it make ibrickr look like spam or in my other case like worm software even dow it is not, the update un the code disable it so it dose not function at all, I have Pc´s next to each other to of them just go update and the ibrickr dose not work in one of the cases, i was adding some more app´s and it did not see the the iphone at all well at least from ibrickr but from itunes it worked fine, well to make this short it come that it is combination of the windows update and the itunes update at the same time, that make ibrickr not work, so your not going to like this, 1.backup all your data, 2. format and reinstall windows do not recovered becouse it is in the registry, 3. reinstall and update windows like normaly 4. when you install itunes 7.4.2 right after that disable firmware update, 5. install itunes 7.4.2 and restore firmware to 1.0.2 on iphone then jailbreak then you can use ibrickr and it will work fine, 6. this is do to the amount money that ATT is loosing to Apple and in the group is windows wmr software updates for media software and so call update for security.
well there is no 6 but 7. it now dose work fine, 8. enjoy, ho i know this cause out 3 pc´s with windows the only one that work was the one that was running Linux at the time when the other 2 where down i check to see the logs to see the difference that was it , i already reinstall windows Xp pro and for now it is working fine, I unlocked two other iphone for friends and install other PKL files I hope this helps, see jaa lott

Posted by lottslott 30 weeks ago ( 10-Oct-2007 19:44:50 )

sorry gent´s I made one mistake it is not itunes 7.4.2 but 7.3.2 I say it is 7.3.2 and enjoy do not up date itune not firmware stay with itunes 7.3.2 and 1.0.2_1C28 firmware and ibrickr AppTappInstaller iLanguage_v0.6.0.rar witch you can find at http://www.hackint0sh.org/forum/showthread.php?t=3196 and for news at http://iphone.unlock.no/#downgrade-1.1.1-firmware with more links enjoy see jaa lott

Posted by bsbpc 30 weeks ago ( 10-Oct-2007 20:00:51 )

Im using Vista and everytime i try to upload an application it says, "iphoneinterface.exe has stopped working" Anyone know how to fix this problem? Help would be greatly appreciated

Posted by juanp 30 weeks ago ( 10-Oct-2007 20:02:07 )

finally got it to work, thanks nate for the easy downgrade

Posted by bsbpc 30 weeks ago ( 10-Oct-2007 20:14:58 )

Im using Vista and everytime i try to upload an application it says, "iphoneinterface.exe has stopped working" Anyone know how to fix this problem? Help would be greatly appreciated

ex_findphone
s_iBrickr version: 0.9
s_iPhoneInterface
s_Waiting for phone
s_Connection established.
r_command
s_ProductVersion = 1.0.2
r_command
iPhone found
r_command
ex_pxlcheck
s_iPhoneInterface
s_Waiting for phone
s_Connection established.
r_command
ex_listapps
s_fileexists
i_st_size=102
s_iPhoneInterface
s_Waiting for phone
s_Connection established.
r_command
e_/var/root/Media/PXL/DB: No such file or directory
r_command

this is my error report.
e_/var/root/Media/PXL/DB: No such file or directory*** could this be the problem?

Posted by smccart 30 weeks ago ( 10-Oct-2007 20:38:10 )

I'm having the "iphoneinterface.exe has stopped working" problem on XP with 0.9 also. is there a comment somewhere that i'm missing that explains how to get around this issue?

Posted by smccart 30 weeks ago ( 10-Oct-2007 20:39:57 )

oops, didnt mean XP, meant to say VISTA

Posted by lottslott 30 weeks ago ( 10-Oct-2007 20:40:40 )

if you are interested in the new exploits in the 1.1.1 firmware here are to new links to look up on developement, and you may help then in one way or an other, http://www.toc2rta.com/?q=blog and here you can get some of the comments from http://www.engadget.com/2007/10/08/iphone-v1-1-1-firmware-gets-the-jailbreak-treatment/ and http://www.tuaw.com/ it is not 100% but you may help who knows you may be the a new hacker in the block.

Posted by lottslott 30 weeks ago ( 10-Oct-2007 20:47:59 )

look in this link that explains the if there is time bariable for the jailbreak and restoring in vista you have to use a stop watch wild booting your iphone look at this link http://iphone.unlock.no/#downgrade-1.1.1-firmware this explains 3 way and some the reasons for it, hope this helps.

Posted by triforceshadows 30 weeks ago ( 10-Oct-2007 21:56:04 )

I'm having the same iphoneinterface.exe problem... I think it might be an error from when it installed the pxl installer, but I'm not sure.

I just hope there is a fix soon, because I lost all my phone numbers and stuff to get this file manager...

Posted by daiduongpham 30 weeks ago ( 10-Oct-2007 22:06:41 )

Finally after 1 weeks i can unlocked fully with fone call worked for iphone downgrade to 1.0.2 If some company or who wanna buy this software i can sell for them,contact me at daiduongpham@gmail.com.with this soft only 10 mins u can unlock ur iphone.

This comment was edited at 2007-10-10 22:08:15

Posted by gonemad 30 weeks ago ( 10-Oct-2007 22:50:51 )

ok, i tested the version 8 against version 9, i had NO problems whatsoever with 8, closed the window, opened 9, and to my suprise it didn't work, closed that window, opened 8 again, and it worked perfectly. dont format your computer your gonna waste time, i have windows xp.

This comment was edited at 2007-10-10 23:01:12

Posted by triforceshadows 30 weeks ago ( 10-Oct-2007 23:15:54 )

8 has the same problem... iphoneinterface.exe

Posted by triforceshadows 30 weeks ago ( 10-Oct-2007 23:29:21 )

never mind, I finally fixed it...

Posted by bazooka 30 weeks ago ( 10-Oct-2007 23:48:21 )

dUDE sHARE?

Posted by bazooka 30 weeks ago ( 10-Oct-2007 23:48:25 )

dUDE sHARE?

Posted by bazooka 30 weeks ago ( 10-Oct-2007 23:48:30 )

dUDE sHARE?

Posted by triforceshadows 30 weeks ago ( 10-Oct-2007 23:51:57 )

I went here... DLed the file here: http://rapidshare.com/files/58454044/iTunesMobileDevice.zip.html

DLed version 8 of iBrickr, pasted the above file into the ibrickr 8 folder, and it worked...

(btw, I'm on Vista Ultimate...)

This comment was edited at 2007-10-10 23:54:41

Posted by fadysal 30 weeks ago ( 10-Oct-2007 23:54:48 )

can someone plzzzzz help me with restoring youtube back on my iphone i tried a million times and it just cant work

Posted by triforceshadows 30 weeks ago ( 10-Oct-2007 23:56:41 ), comment hidden (show)

Posted by niche 30 weeks ago ( 11-Oct-2007 00:11:57 )

hello ppl why is it that on this page oi cant download ibrickr a messsages always pops up saying that the file is corrupted can somebody please help me

Posted by robbpell 30 weeks ago ( 11-Oct-2007 02:05:02 )

looks like you have work to do im reading confirmed jailbreaking 1.1.1 and sucess with ssh also a working and non working app list at modmyiphone! will be checking for update!

This comment was edited at 2007-10-11 02:07:06

Posted by bona 30 weeks ago ( 11-Oct-2007 02:21:35 )

I managed to jail braek from reinstalling version 1.1.2 as i was silly enough to upgrade to 1.1.1
After freeing my phone its all working except i cant make calls. which i know it would not work anyway!! Everything is fine except I cant get any sounds when I use the ipod not through the iphone or through a headset. Can anyone help me in getting the sound back. To unlock the phone i used a combination of ibricker v8 and ibricker v9 as v9 seemed to crash in certain areas.
Thanx!!

Posted by nazhandyo 30 weeks ago ( 11-Oct-2007 05:01:34 )

Hi iPhone Users., i have this 1 problem, ive uploaded some jpeg file on my iphone to change the carriers logo at System/Library/CoreServices/SpringBoard.app/ but after uploading, i cant delete it anymore., anyone there who can teach me how to delete those files that i've uploaded using ibrickr 0.8., any reply would be appreciated., thanks in advance!!! Godbless!!!!

This comment was edited at 2007-10-11 05:03:20

Posted by natetrue 30 weeks ago ( 11-Oct-2007 08:52:04 )

Hey guys, sorry about the crashing issues with 0.9. I've got 0.91 up now that should resolve them.

Posted by areku 30 weeks ago ( 11-Oct-2007 09:34:30 )

Thanks for the update, natetrue!

Posted by toycrazy 30 weeks ago ( 11-Oct-2007 10:07:47 )

Hi Nazar:

i just purchased an iphone from the US and am absolutley not tech savy. Would you be able to help me set up my iphone to work in Canada. I too am in toronto and would appreciate any assistance you can provide. How do i contact you?
Thanks

Posted by drale 30 weeks ago ( 11-Oct-2007 10:10:17 )

HI, sorry if this seems stupid, but what is the probable eta on the new version of ibrickr for jailbreaking 1.1.1?

Posted by zzzeugen 30 weeks ago ( 11-Oct-2007 10:18:12 )

can you tell me please where can i find a converter of video files for iphone?
(i want to watch videos (.avi) on my iphone)
thank you!

Posted by robbpell 30 weeks ago ( 11-Oct-2007 10:23:48 )

you cant watch avi on your iphone they have to be mp4

Posted by rogerpeerbooms 30 weeks ago ( 11-Oct-2007 15:25:42 )

VERY BIG PROBLEMS after trying Brickr 0.91: Iphone keeps booting over and over again: apple logo, then display flashes like a thunderbolt, again apple logo, again thunderbolt. How can i get rid of this. Looks like a very serious problem. Suggestions? PLEASE HELP.....

Posted by vdutra 30 weeks ago ( 11-Oct-2007 15:41:36 )

Conect iPhone in DOC and run "iphoneinterface.exe" (with iTunes run)
in DOS windows type:

setenv auto-boot true (enter)
saveenv (enter)
fsboot (enter)

and waint 30 sec, that´s it

Posted by rogerpeerbooms 30 weeks ago ( 11-Oct-2007 15:57:13 )

Hello, thank you for helping me!!
It says: e_no iphone detected
Any suggestions?

Posted by rogerpeerbooms 30 weeks ago ( 11-Oct-2007 16:03:52 )

Keeps looping. Seems to react on nothing anymore

Posted by hollywoodd 30 weeks ago ( 11-Oct-2007 16:13:51 )

Need help please. Ok I just received my iphone. I assumed it would be running 1.1.1 since it's brand new. Is there anyway to confirm?

Posted by vdutra 30 weeks ago ( 11-Oct-2007 16:19:49 )

Roger,

first, You need to turn off the iphone, disconnect the DOC and wait a few minutes,
or try holding off the button sleep / walk for quite seconds and drop,
then connect again in the DOC and conect again... DOS type:... (with iTunes open)

setenv auto-boot true (enter)
saveenv (enter)
fsboot (enter)

and wait 30 sec, that´s it

try

Posted by vdutra 30 weeks ago ( 11-Oct-2007 16:29:38 )

hollywood
type *3001#12345#* and CALL, next push Version,

if you see "firmware 04.01.13_G", is possible 1.1.1

if you see "firmware 03.14.08, is possible 1.0.2 " ***** disconnect immediately itunes ***** "
and do not upgrade, care !!!!

Posted by rogerpeerbooms 30 weeks ago ( 11-Oct-2007 16:53:35 )

it answers:
s_iPhoneInterface
s_wating for phone
e_no Iphone detected

Posted by rogerpeerbooms 30 weeks ago ( 11-Oct-2007 16:59:46 )

So it stops after typing iphoneinterface (enter)

Posted by vdutra 30 weeks ago ( 11-Oct-2007 17:12:04 )

Roger,
You shut down the iphone and called again, the PC recognizes the iphone when they connect the USB?
You already restarted the computer and did it all over again? (change usb port ?)

Posted by hollywoodd 30 weeks ago ( 11-Oct-2007 18:40:03 )

I started with a virgin phone and I successfully downgraded to 1.1.1. At least I think I did, I followed a tutorial step by step, downgraded the firmware and then I installed Installer.app twice.

I ran IBRIKR and it can access the directory but I stopped there. The tutorial I was using started to confuse me because I think it was geared to MAC and it assumed that my phone was already activated??

What’s the next step? Do I activate my phone the 1.02 way? And if I do it that way will I be able to make calls? Can someone guide me to a better tutorial or something… here’s the tutorial I am using.

http://www.iphonegoboom.com/jailbreak/jailbreak111.html

Posted by vdutra 30 weeks ago ( 11-Oct-2007 20:07:17 )

hollywood

What´s your version? (you see before?)

type *3001#12345#* and CALL, next push Version,

if you see "firmware 04.01.13_G", is possible 1.1.1

if you see "firmware 03.14.08, is possible 1.0.2 " ***** disconnect immediately itunes ***** "
and do not upgrade, care !!!!

Posted by gonemad 30 weeks ago ( 11-Oct-2007 20:11:58 )

question, I have my first phone that i bought and accidentally updated to 1.1.1(phone was fresh out the box and it was the day 1.1.1 came out and i didn't READ that it said 1.1.1 instead of 1.0.2), i then downgraded to 1.0.2, and installed the anysim but of course it didn't work, it just said phone was already patched, i want to know if the ipsf software will work to unlock it so i can use it??? any ideas NATE?? anyone???

Posted by niche 30 weeks ago ( 12-Oct-2007 01:57:33 )

hey nate thaNKS A LOT FOR IBRICKR 0.9 I DOWNGRADE MY IPHONE FROM 1.1.1 TO 1.0.2 AND INSTALL ALL THE APPL YOUR THE MAN DUDE!!!

Posted by vincentlea 30 weeks ago ( 12-Oct-2007 02:07:24 )

Hi Natetrue,
I am using v0.8 on my unlocked iphone. when installed several apps. Some apps can not work. like rSBT.And, ibrickr can not install or delete any app for iphone. ibriker shows like this:
Your application has been scheduled for deletion. Your iPhone will soft-restart when done.
but my iphone stays unchanged.
I think there may be some thing wrong with ibrickr deamon process on iphone. what can i do to reload or reinstall ibrickr deamon process?

thanks alot for ur excellent job!

Posted by aussie 30 weeks ago ( 12-Oct-2007 07:10:57 )

To know what FIRWARE your Iphone came without activation or activated, slide to emergency or to unlock if activated and dial this number

*3007#12345#*

then call

the ready in the list of menus check the firmware version!!

If you have

03.12.06-G then is - Firmware 1.0.0
03.14.08-G then is - Firmware 1.0.1 or 1.0.2
04.01-13-G then is - Firmware 1.1.1


Hope this helps to all that dont know what firmware they have.
;)

ANDRE HACKER!

Posted by aussie 30 weeks ago ( 12-Oct-2007 07:12:53 )

Sorry the number to dial is : *3001#12345#* I make a mistake with the *3007....

cheers

ANDRE HACKER

Posted by rush 30 weeks ago ( 12-Oct-2007 15:25:13 )

Hey guys,

I got this link where its showing a procedure to change the baseband of iPhones that were updated from 1.0.2 to 1.1.1 my mistake (or stupidity in my case). The problem is that I dont even know how to SSH my iPhone and try the method to replace files and change the files there.
Can someone more experienced help on analyze this and explain how do I ulock the SIMcard of my iPhone.

http://hackint0sh.org/forum/showthread.php?t=10863&highlight=1.1.1+secpack

Many thanks,

Rush

Posted by aussie 30 weeks ago ( 12-Oct-2007 15:57:13 )

Hello Nate true!

I downgraded from 1.1.1 to 1.02 using ibrick 0.91 version and work well but now it says the screen Goodbuy done done! what does it mean? Still installing or modifing the phone? I am in the screen modifying the iphone please wait and almost more than 15 minutes...

Can u tell me thanks Nate true!

Posted by hollywoodd 30 weeks ago ( 12-Oct-2007 16:03:06 )

Has anyone installed SSH with a windows machine on firmware 1.1.1 (iphone)... I am at the last steps of the hack and I am stuck. I can't seem to install SSH, I also don't know how I am supposed to get the IP of my iphone when it's still not activated....

I am following this tutorial.

http://www.iphonegoboom.com/jailbreak/jailbreak111.html

Posted by hollywoodd 30 weeks ago ( 12-Oct-2007 16:03:07 )

Has anyone installed SSH with a windows machine on firmware 1.1.1 (iphone)... I am at the last steps of the hack and I am stuck. I can't seem to install SSH, I also don't know how I am supposed to get the IP of my iphone when it's still not activated....

I am following this tutorial.

http://www.iphonegoboom.com/jailbreak/jailbreak111.html

Posted by aussie 30 weeks ago ( 12-Oct-2007 16:10:15 )

hollywood!!
may I ask you something?
your iphone after passing ibrick 0.91 was saying goodbuy! done done all the time like something doing but still waiting...

I am still waiting the iphone to finish the process but still the same can u tell me if you see this screen also?

thanks

I know ssh but I am still trying to finish this step to get the next where u are so I can help u too
let me know thanks

Posted by hollywoodd 30 weeks ago ( 12-Oct-2007 16:28:46 )

Aussie

I only used Ibrick 0.91 to downgrade the firmware....

Posted by alyshayellowspyder 30 weeks ago ( 12-Oct-2007 16:55:28 )

hi, i was trying to restore my iphone and everytime i push the restore i get i am not connected to the internet and it won't work but i am connected and my phone is stuck in recovery mode . can someone help please.

Posted by alyshayellowspyder 30 weeks ago ( 12-Oct-2007 17:28:48 )

Posted by aussie 30 weeks ago ( 12-Oct-2007 19:12:04 )

Hollywood I got the screen sweet and then I reset and nothing I couldnt access the files browsing to continue with the SSH let me c what I can do let u know so we can unlock together I will post how I did it once I got there!

take care keep u posted

Posted by bocdk 30 weeks ago ( 12-Oct-2007 21:26:36 )

ibricker 0.91 : when downgrade sucessful, so can we use the phonecall?

Posted by aussie 30 weeks ago ( 12-Oct-2007 21:46:15 )

Hollywood!!!

I used the ibrick 0.91 to downgrade my firmware and then ibrick 0.91 to jailbreak and the only thing I couldnt make was Check PXL but I used files to upload the lockdown file and then restart Iphone and then IPHONE HACKED finally I got it!!!

Just browse FIles and select lockdown file and after uploaded just restart!! dont need to use SSH in my case worked perfectly!!!

See this guide help me a lot:

http://youtube.com/watch?v=Qm_4z3fdO-Q&mode=related&search=

any question asked me hollywood!!

Posted by hollywoodd 30 weeks ago ( 12-Oct-2007 22:30:44 )

Aussie,

I am going to watch that video...however based on your explanation I think you are still at 1.0.2. If I understand correctly the phone won't work with that hack. You still need to modify a media directory, upgrade to 1.1.1, then install ssh and bsd through dos. I can make it very far... I have had to do many restores.... :-)

Still haven't completed a full unlock though... One thing i noticed is that sometimes ssh installs properly and sometimes it doesn't install at all... Can't figure out why... I used to have the problem of finding out what the IP address of the phone was. The problem was I couldn't check the IP address because the phone was still locked... So when I was at 1.02, i went into gui and wrote down the IP address before hand..

still having problems installing ssh on 1.1.1 firmware though... :-(

Posted by hollywoodd 30 weeks ago ( 12-Oct-2007 22:34:12 )

Aussie,

That video is old, it's for 1.02. So I guess you downgraded from 1.1.1 to 1.02 and then used sim unlock??? Can you make phone calls?

Posted by mittens 30 weeks ago ( 12-Oct-2007 23:48:32 )

alyshayellowspyder - If your phone is stuck in recovery, try using iBrickr 0.91. It has a feature to help you out of recovery mode. iBrickr will recognize your phone is in recover and it will attempt to fix it.

This comment was edited at 2007-10-12 23:51:03

Posted by jylouie 30 weeks ago ( 13-Oct-2007 01:09:11 )

I was just using the installer to uninstall some applications. my wifi was on. and suddenly my phone froze. no matter what i press its still frozen. what can i do. =[

Posted by jylouie 30 weeks ago ( 13-Oct-2007 01:12:41 )

i tried pressing the home button plus the top button. it turned off. i turn it back on. now i just see the apple sign and nothing else.. what do i do?

Posted by hollywoodd 30 weeks ago ( 13-Oct-2007 06:25:46 )

jylouie

Don't panic. You need to do a restore. When that happens to me I do a manual restore to 1.0.2. You can use ibrickr 0.91. (it has feature that reboots your phone). if that feature doesn't come up then just keep playing with the home button and top button routine... don't forget to keep your finger on the home button when you let go of the top button after 10 seconds.... it will eventually work... just keep trying.

Posted by steveeld 30 weeks ago ( 13-Oct-2007 07:10:26 )

Just a quick pat-on-the-back for helping open up so many iphone possibilities. A little pay-pal tip would be more concrete and I, for one, intend to do just that. Thanks again.

Posted by aussie 30 weeks ago ( 13-Oct-2007 08:25:34 )

hollywood

yes I downgraded first because my firware was 1.1.1 I did it using ibrick 0.91 and installed Sim unlock everything seems to work fine!! I know the video is old but help a lot after you downgrade but use the 0.91 not the 0.8 if you downgrade to browse files and upload aplications but if u downgrade as Nate true says using version 0.91 will be working fine like it was for me.

One thing when the screen get black in the process after the triangle and a lot of code passing and saying at the end Goodbye Done! just any less than a minute and will end the process successfully restarting the iphone and that's it!! if your iphone does not restarts restore the iphone process again and run ibrick 0.91 it should not take more than a minutes this process if long more like happened to me I just press again home + power button and get the triangle again and again pass ibrick until the process was successfully done!

It take a trick to make it work but worth to me and now I have my iphone working sweet!!!
any questions ask me.

PD: itunes is the only thing does not seem to work but I will post once I find a fix.


Take care !

Posted by alyshayellowspyder 30 weeks ago ( 13-Oct-2007 09:16:30 )

hi, i need to restore my phone thru itunes .i have firmware 1.0.2 and the lastest version of itunes . my phone is in recovery mode and when i push the restore button it says it can't restore because i am not connected to the interenet?

Posted by jylouie 30 weeks ago ( 13-Oct-2007 09:22:26 )

thanks. i restarted it like a few times. with apple logo still there, then i decided to plug it onto the dock and suddenly i see the unlocking slide button. i was like OMG. so happy. thanks for the advice though.

Posted by aussie 30 weeks ago ( 13-Oct-2007 09:59:19 )

I make itunes to work!! for those who does not know how it is easy!!
get the youtube fix.rar files over the net navigate in your iphone jailbroken using ibrickr 0.91 version.

go to files ->

navigate

var/root/Library/lockdown
private/root/Library/lockdown

make backup of those files by selecting them and download to your computer.

Upload the 3 new files there from the youtube fix.rar file.

create a new folder called "activation_records" there also.
restart and there you have you tube working!! ;)

I got it! thank nate true your 0.91 wow!! can install anything!!
Iphone firmware 1.1.1 really hacked finally!!!

THIS IS ANDRE HACK ATTACK THANKS TO NATE TRUE!!

Posted by porkchoppryde 30 weeks ago ( 13-Oct-2007 10:05:49 )

Hey everyone thanks for the help earlier I went back to version 0.8 and got everything working but I got 1 more problem, I was wondering how I can get Youtube to work I have an unlocked Iphone and I got custom ring tones in there, nes roms, ect but the only thing not working is youtube....I saw a tutorial that was claiming this is how you put youtube to work but when i was reading it it seemed like all it was doing was unlocking the phone is there a way to just focus on making youtube work? Thank you in advanced I very much appreciate it :)

"Cannot connect to YouTube"

Thats the error message I receive.

Posted by aussie 30 weeks ago ( 13-Oct-2007 10:07:16 )

If your iphone is in restore mode and not connecting with ibrick please run itunes!!! again but remember first to CTRL + ALT + DEL first to kill the following processes running

ipodservice.exe
ituneshelper.exe

then run again and then ibrick works again!!! but keep it in the connect to itunes triangle screen when open ibrick!!


THIS IS ANDRE HACK ATTACK THANKS TO NATE TRUE!!

Posted by gonemad 30 weeks ago ( 13-Oct-2007 10:22:14 )

has anyone downgraded the baseband??? having problems % - (

Posted by porkchoppryde 30 weeks ago ( 13-Oct-2007 10:24:54 )

Aussie can you explain a little bit more about youtube? I have an unlocked iphone and I am using ibrickr 0.8 because 0.9 would not allow me to put applications in for some reason (seems to be a problem many people are having) but I also want to get youtube working and I am reading your steps but where can i download the file you are talking about and also i dont understand this step

create a new folder called "activation_records" there also.
restart and there you have you tube working!! ;)


if you could be a lil more specific that would be appreciated, are you saying all I gotta do is create a folder and do nothing else and im done and youtube will work?

Posted by aussie 30 weeks ago ( 13-Oct-2007 11:07:45 )

You have to create the folder "activation_records" in the same dir of

var/root/Library/lockdown

the folder should look like:

activation_records/
device_private_key.pem
device_public_key.pem
data_ark

verify that the

var/root/Library/lockdown

and

private/root/Library/lockdown

have the same files too. I just uploaded in the var/root/Library/lockdown and was not necessary to upload them in the other one because I think the are connected and show the same files!!

I hope this helps!


THIS IS ANDRE HACK ATTACK FOR FIRMWARE 1.1.1 THANKS TO NATE TRUE!!

Posted by gonemad 30 weeks ago ( 13-Oct-2007 11:21:18 )

hello need help with steps and which programs to use for baseband downgrade. I ve done a lot of reading but just going in circles. cant get the winscp to connect. HELP!!!

This comment was edited at 2007-10-13 11:24:01

Posted by porkchoppryde 30 weeks ago ( 13-Oct-2007 11:33:27 )

Aussie where can I download the 3 files you speak of I can't find them anywhere?

Posted by gonemad 30 weeks ago ( 13-Oct-2007 11:34:31 )

pork!!! use pacay it work just fine.

Posted by aussie 30 weeks ago ( 13-Oct-2007 11:37:48 )

Download them from here:

http://rapidshare.com/files/55194961/youtube_fix.zip.html

Sweet!!

THIS IS ANDRE HACK ATTACK FOR FIRMWARE 1.1.1 THANKS TO NATE TRUE!!

Posted by gonemad 30 weeks ago ( 13-Oct-2007 11:37:57 )

email me again.

Posted by gonemad 30 weeks ago ( 13-Oct-2007 11:39:47 )

aussie can you help with the baseband????

Posted by aussie 30 weeks ago ( 13-Oct-2007 11:39:55 )

gonemad!

I never make a baseband downgrade just use the ibrick 0.91 with itunes 7.3.2.6 and sweet!!! also my firmware shown in iphone the 1.1.1 but it is hacked anyway!! everything works!! so sweet!!

Posted by justinvathje 30 weeks ago ( 13-Oct-2007 11:42:37 )

can you explain how you did it? maybe step by step?

Posted by gonemad 30 weeks ago ( 13-Oct-2007 11:46:07 )

does anysim work??

Posted by justinvathje 30 weeks ago ( 13-Oct-2007 11:46:12 )

i couldn't get it to work, i ended up buying simfree but i have to wait 24 hours for the number to be updated to the server :(

This comment was edited at 2007-10-13 11:47:26

Posted by porkchoppryde 30 weeks ago ( 13-Oct-2007 11:59:55 )

gonemad what is pacay i never heard of it and Aussie so just to clarify i don't have to re unlock my phone right, all i am doing is making my youtube work?

Posted by porkchoppryde 30 weeks ago ( 13-Oct-2007 12:10:57 )

I just downloaded the file you gave me and then uploaded it into here

You have to create the folder "activation_records" in the same dir of

var/root/Library/lockdown

the folder should look like:

activation_records/
device_private_key.pem
device_public_key.pem
data_ark

and u made the folder as well but still youtube is not working i turned my iphone off and turend it back on and still nothing?

Posted by porkchoppryde 30 weeks ago ( 13-Oct-2007 12:13:17 )

I just noticed i have another file in there called pair_records/ its a folder i mean and it has a bunch of stuff there too do i just leave that? also the folder activation records i dont put anything isde that?

Posted by profg 30 weeks ago ( 13-Oct-2007 12:16:41 )

Hi al,
Can anyone advise how to get the '3' Network SIM working on the iphone (UK)? I've managed to get an 'Orange' SIM working through anySIM but'3' comes up with 'Invalid SIM'!
Any help, or pointers, will be appreciated.

Posted by geekmom 30 weeks ago ( 13-Oct-2007 12:17:24 )

OK someone PLEASE help me. I am obviously doing something wrong.... I get everything up and running and anySIM just gives me an error message!!!!! please email me or direct me somewhere where I can do this and get my phone up and running all the way!!!!
swinchester521 at msn.com.

Posted by hollywoodd 30 weeks ago ( 13-Oct-2007 12:24:10 )

Aussie,

Are you now running the firmware version 1.1.1? Do you have access to all the updates? ie:ITUNES on the iphone. or did you have to stay at 1.0.2.

Question to everyone else. I can downgrade and hack very easily to 1.02, but I want to be at 1.1.1. I don't want to modify the baseband to unlock by using anysim.

I almost make it to the end but sometimes SSH installs and sometimes it doesn't. SSH I install with this tutorial.

http://modmyiphone.com/wiki/index.php/Dev_Team_Installing_SSH_1.1.1_Windows

sometimes it doesn't work though?

Posted by jylouie 30 weeks ago ( 13-Oct-2007 12:42:54 )

i have a question. when i use ibrickr, i got the ringtones uploaded, but somehow the applications won't work. every time i try to upload it. there's an error message saying "iphoneinterface.exe has encountered a problem" and the options to send report or don't send. does anyone know whats wrong?

Posted by gonemad 30 weeks ago ( 13-Oct-2007 12:54:52 )

download ibrickr .91 you might have .9

Posted by porkchoppryde 30 weeks ago ( 13-Oct-2007 13:08:08 )

Nice I just got youtube working thanks for the help guys :D

Posted by freddynu 30 weeks ago ( 13-Oct-2007 13:42:31 )

Curious does any one know if the 1.1.1 can be unlocked now for tmobile with out paying and registering your imei

This comment was edited at 2007-10-13 14:08:02

Posted by adibcanale 30 weeks ago ( 13-Oct-2007 18:15:29 )

Hi, im Mexican and i want to congratulate ibrickr. its the best!! I want to know when will be ibrick for firm 1.1.1 done...

CHEERS

ADIB

Posted by sami 30 weeks ago ( 13-Oct-2007 18:49:58 )

i downgrade my iphone from 1.1.1 to 1.0.2
& i use This the step I do it for my phone
1- downgrade like
2- I run AppTappInstaller.exe 2 times
3-After that (CLICK HERE) activate.bat
4- Run ibrickr.exe

I browse application any sim to my phone & I run from the phone .
but my i phone dont read my sim card!!!!
(incorect sim card)
please helppppppppppppppppppppppppppppppppppp

Posted by marcr 30 weeks ago ( 13-Oct-2007 19:16:00 )

Help.

I have an older version of ibrickr and want to upgrade to the latest version. Are there upgrading instructions? I'm clearly not figuring this out on my own.

This comment was edited at 2007-10-13 19:58:47

Posted by geekmom 30 weeks ago ( 13-Oct-2007 20:13:20 )

scroll up to the top of the screen.....jeesh!

Posted by magneticwave 30 weeks ago ( 13-Oct-2007 21:08:01 )

hi everyone..my iphone freezes...that means any application wont work even the home button...hafta press the power and home button to restart...my phone was originally 1.0.2 and never updated...im using the latest version of ibricker which is .91... i need you guys...thanks..

Posted by hollywoodd 30 weeks ago ( 13-Oct-2007 22:27:34 )

magneticwave,

You might need to do a restore. You should be able to do a restore with the latest ibrickr.

Posted by ziplock 30 weeks ago ( 13-Oct-2007 23:34:16 )

Itunes or Ibrickr cannot detect my iphone.
I have 1.0.2 firmware.

I get the following error with iBrickr 0.91
e_Problem registering main callback: -402653180

Posted by freddynu 30 weeks ago ( 14-Oct-2007 00:43:23 )

Gonemad

Your probably the only one other then alot of people on here now to know this but Curious if you know if the 1.1.1 can be unlocked now for tmobile with out paying and registering your imei. I have heard some crazy method but I get lost in the translation and process. It is too damn complicated to under stand.

P.S. Have you got your phonebook up and running I emailed you but got no response.

Posted by graverski 30 weeks ago ( 14-Oct-2007 04:55:57 )

Hi i have just notices that, if i rename the iBr